Archive for BRIT NERF Home of the British NERF Community
 


       BRIT NERF Forum Index -> Modifications
SBNC

Twin RS build, 'Double Tap.

This blaster was 6 weeks in the making. Two Rapidstrikes, a Centurion and a Raider donated parts to this project.




N-Strike badge is from a Barricade battery lid


Double deep trigger well


Centurion stock integration


A switch on either side lets you choose which RS you want to fire, left, right or both


when you pull the rev trigger, both sets of flywheels will activate, the toggles only switch off the pusher. This allows you to switch on the fly.




A fair bit of scratch building was required to cover the hole left by cutting out the handle





Mod list:
- two RSs with sides sanded flat for flush side-by-side fit
- rewired with 18 AWG wire and 16A micro switches all round
- EMF breaking using Make Test Battle's wiring guide
- two 30A toggle switches (one per RS)
- locks removed
- handle's shell inverted and attached to the inner RS halves
- integrated Centy stock
- Raider fore-grip
- 6 Falcon 130 motors, 4 flywheel, 2 pusher (no room for 180s on the left RS sadly and I wanted to keep performance even)
- Duplicolor matte dark grey base coat (2 coats)
- Duplicolor metallic cyan acrylic (2 coats)
- Tamiya florescent orange
- Duplicolor gloss acrylic clear coat (2 coats)

Battery = 3S LiPo
bracket

Shocked thats sweet. Can we see it firing?

Bracket
UKNerfWar

Needs more cowbell.
OldNoob

I like everything about it except the exposed flywheels at the front. The stock and grip treatment is very clever indeed.
TopDart25

That is a thing of beauty. The blasters are integrated very well with little to indicate that they were actually separate blasters. I quite like the paint job as well.

I have to ask though, is there an unspoken rule that when multiple Rapidstrikes are integrated that it must be painted cyan?
SBNC

OldNoob wrote:
I like everything about it except the exposed flywheels at the front. The stock and grip treatment is very clever indeed.


They were covered early on but it ruined the low profile of the front if the RSs, just didnt look right. And this way, I can observe the foam build up on the wheels.

bracket wrote:
Shocked thats sweet. Can we see it firing?

Bracket


Keep an eye on my channel


EDIT

Please don't double post, add to your previous post if nobody has replied. Tidied it up for you-ON


       BRIT NERF Forum Index -> Modifications
Page 1 of 1
Create your own free forum | Buy a domain to use with your forum