BRIT NERF Forum Index
Join! (free) SearchFAQMemberlistUsergroupsLog in
Upgraded Retaliator priming catch issue

 
Reply to topic    BRIT NERF Forum Index » Q&A and New members View previous topic
View next topic
Upgraded Retaliator priming catch issue
Author Message
Please Register and Login to this forum to stop seeing this advertising.







Supercollide
Junior Member


Joined: 18 Apr 2017
Posts: 27
Fav. Blaster: Nitefinder/Firestrike & Whistlers
Location: Leeds/Bradford



Post Upgraded Retaliator priming catch issue  Reply with quote
Got round to putting an upgrade spring in my retaliator (which I got 2nd hand about a month ago).

Picked up a 5kg jazzo sazzo one, dropped in on Wednesday night and hit a few problems.
The priming seems significantly harder, feels it's more than doubled to be honest but the real issue is that it's much harder to 'catch' and I'm jamming almost every 3rd dart when it just misses the catch.

I've had it open about 8 times since, checked nothing else has shifted, put the original spring back in (it worked fine again) and out again. I've tried pulling the other locks out to attempt to double up the catch spring but that only seems to have made it worse, it's wasn't catching any better but jamming even more.

Not sure if I need to be trying to pickup the OMW Stage 1 kit just for the catch spring or what.

Anyone got any clever ideas?
Fri Jun 09, 2017 9:24 am View user's profile Send private message
OldNoob
Foam Data Collector


Joined: 07 May 2013
Posts: 4821
Fav. Blaster: Xtreme 180 Rapidstrike
Location: In the Boonies



Post Reply with quote
You need to shave the ribs inside the stock block, on both shell halves. Many retaliators seem to have insufficient clearance there for the thicker coils of a mod spring. It's 3 vertical and one horizontal rib, right by the catch and inside the stock block, shave about 1-1.5mm off each rib.
It is nothing to do with the catch spring strength. Also if you ever need a catch scoring aŁ1 pack of mixed compression springs will usually yield either a direct replacement or one that can be cut to length. The only blaster that always needs a catch spring upgrade is the EAT. Rest are fine up to 10kg.



Ribs marked in this picture.

_________________
Big_Poppa_Nerf wrote:

Boff whats the damage? I have spent over 3 times my Nerf budget this month already. Part of me is trying to be a responsible parent/husband/house owner. The other half is just says 'Ahhhh, Screw it!'.
Fri Jun 09, 2017 10:04 am View user's profile Send private message Send e-mail
old_man_nerf
Game Organiser


Joined: 25 Jan 2013
Posts: 808
Fav. Blaster: I wanna Nemesis!!
Location: Leeds



Post Reply with quote
7kg orange mod works is probably the best spring for performance/minimal faff compared to the others i've tried.

Nerf Turf 10 kg needed those ribs taking out - and also eventually broke the supports that hold the plunger tube from repeated impacts.

_________________
Grim up Nerf - www.facebook.com/grimupnerf
Fri Jun 09, 2017 10:57 am View user's profile Send private message Visit poster's website
Supercollide
Junior Member


Joined: 18 Apr 2017
Posts: 27
Fav. Blaster: Nitefinder/Firestrike & Whistlers
Location: Leeds/Bradford



Post Reply with quote
Thank for the advice on this, it took awhile but it worked.
In the end I had to shave a good 3-4mm and put a slight slope on the ribs off despite the new spring only being a fraction wider.
I still have to be quite firm with the prime to ensure it catches but that'll come with a bit more practise.
Thu Jun 22, 2017 3:11 pm View user's profile Send private message
OldNoob
Foam Data Collector


Joined: 07 May 2013
Posts: 4821
Fav. Blaster: Xtreme 180 Rapidstrike
Location: In the Boonies



Post Reply with quote
Next thing to do is to extend the priming stroke a bit, your plunger head could be damaged or slightly short. The easiest thing to do is to remove the + shaped ribs from inside the plunger head then put a 2mm plastic insert in with DEVCON, then stick a rubber buffer pad to that, 3mm thick is ideal. I have a left over bit you could have. That allows much less effort to go into the prime and makes catching super smooth. My 7kg S3 retal runs a stock catch spring!
BSUK 5kg fits much better.



_________________
Big_Poppa_Nerf wrote:

Boff whats the damage? I have spent over 3 times my Nerf budget this month already. Part of me is trying to be a responsible parent/husband/house owner. The other half is just says 'Ahhhh, Screw it!'.
Thu Jun 22, 2017 9:19 pm View user's profile Send private message Send e-mail
Display posts from previous:    
Reply to topic    BRIT NERF Forum Index » Q&A and New members All times are GMT
Page 1 of 1

 
Jump to: 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

Card File  Gallery  Forum Archive
Powered by phpBB © 2001, 2005 phpBB Group
Design by Freestyle XL / Flowers Online.
Create your own free forum | Buy a domain to use with your forum